Welcome to Atrak Pool & Site Excavations Sydney.

Interesting Rock Sawing job in Neutral Bay recently, we had to excavate to create two basements for some new duplexes.

Sydney’s Lower North Shore has very small blocks generally and so the site access is quite tight. We used the big Rock Saws and hydraulic hammer to remove all the sawn sandstone from the site.

This was a really tight site to get into. We ended up lowering our Bobcat into the site using a large crane to complete deep excavation and site cleanup work. If you have a tight site and are looking for a solution talk to us about lowering our Bobcat or Excavator

Very deep site excavation for a house in Gladesville Site to extend an existing dwelling. This included 4 m deep piers & strip footings and then we used our Bobcat and tipper to remove all material from site

Nice big pool excavation in Lindfield on Sydneys Upper North Shore, we excavated Strip footings for new retaining walls and we did a full site clean with our Bobcat and then removed all the fill from the site

Very big job to excavate a pool in Longueville, the entire yard was solid Sandstone

Pool excavation was 20 m x 4 m, we had to use our rock saw for the whole excavation, as a conventional hydraulic rock breaker could not be used due to council regulations (noise and vibration restrictions).

We also did all the clean up and removal from site of sandstone blocks (from excavation of pool).

This was an interesting job in Longueville, just near Lane Cove on Sydneys Lower North Shore.

We had to rock saw across an entire boundary both with our rock saw and rock breaker (removed the rock out of the ground), to enable a 3 m high concrete retaining wall to be erected.

A few weeks ago we did a pool excavation in a very tight spot on the North West of Sydney, small back yard with tight access. As you can see fantastic result.