Welcome to Atrak Pool & Site Excavations Sydney.

This rock sawing job was for a major renovation to a family home in Longueville.

We removed all of the excavated rock from site.

The clients and the builder were extremely happy with the time in which the job was completed and also the quality of the workmanship.

Please see below the testimonial from the owners:

Arabella St
Longueville

We cannot speak highly enough of the excellent finish Trevor and his Atrak team achieved at our site.  They had to excavate directly adjacent to our existing 100 year old house to enable us to begin our renovations.  Approximately 200 cubic metres of mostly hard sandstone needed to be removed from a challenging block with difficult access and a new home next door, only 2m away.

Atrak completed the job on time and with the estimated costs.

Atrak liaised professionally with the neighbours and us at all times.  Our builder was so impressed with Atrak that he has used them for quoting jobs after ours.

We would high recommend Atrak to anyone requiring residential excavations.

Simon and Catherine Pagett

Another site excavation using the rock saw at Brookvale.  Due to the close proximity of the neighbouring properties, the rock saw was a safest option.  As the vibration needed to be kept to a minimum.

This excavation was for a pool in a residential property at Bondi.  We used the rock saw on this job and removed all the material with the Bogie Tippers.

This rock sawing job was for the purpose of some extra bedrooms being built under the existing house.  A combination of excavator, bobcat, rock saw and tippers were used to complete a reasonably difficult job.  All excavated material was removed from site.

Another difficult rocksawing job at Longueville!

This rock excavation was for the ground level (or basement) of a new home being built.  Approximately 500 cubic metres of extremely hard rock was excavated by rocksawing.

This rock excavation in Lane Cove, for a stormwater retention tank was in solid sandstone, and required the use of a rocksaw and rockbreaker (to reach the required depth of 4 metres).

This pool excavation was completed in October.

The ground was solid rock, as it is usually is in the Sutherland Shire – South of Sydney.  We excavated this pool with the use of the rock saw and hydraulic hammer.  As you can see the pool excavation was completed to plan.

GIVE US A CALL FOR ANY QUESTIONS OR QUOTATIONS YOU MAY REQUIRE FOR ROCK SAWING OR ROCK EXCAVATION 0419 226 599.

This pool excavation was carried out in the North West of Sydney at Castle Hill.

This pool excavation at Castle Hill needed the use of a hydraulic hammer (rock breaker). All the fill was loaded with a bobcat onto bogie trucks and removed from site. The customer and client were extremely happy with the finished product.

Read the rest of this entry »

Difficult Site Excavation for underground car park for new dwelling.

This difficult excavation was done by both rocksawing and rockbreaking the natural ground. The job had very difficult access and due to the weather we were under great pressure to complete the job.

This was a great job in Summer Hill. Most of these sites are pretty tight in Sydneys Inner West, the owners had decided to put a new triple garage in and a swimming pool. We had to excavate the strip footings and piers and then in the backyard excavate for a 8 x 4 m swimming pool. We then removed all the material from the site and used the Bobcat to clean the site up afterwards.