Welcome to Atrak Pool & Site Excavations Sydney.

This rock sawing job was for a major renovation to a family home in Longueville.

We removed all of the excavated rock from site.

The clients and the builder were extremely happy with the time in which the job was completed and also the quality of the workmanship.

Please see below the testimonial from the owners:

Arabella St
Longueville

We cannot speak highly enough of the excellent finish Trevor and his Atrak team achieved at our site.  They had to excavated directly adjacent to our existing 100 year old house to enable us to begin our renovations.  Approximately 200 cubic metres of mostly hard sandstone needed to be removed from a challenging block with difficult access and a new home next door, only 2m away.

Atrak completed the job on time and with the estimated costs.

Atrak liaised professionally with the neighbours and us at all times.  Our builder was so impressed with Atrak that he has used them for quoting jobs after ours.

We would high recommend Atrak to anyone requiring residential excavations.

Simone and Catherine Pagett

This excavation was for a pool in a residential property at Bondi.  We used the rock saw on this job and removed all the material with the Bogie Tippers.

This rock sawing job was for the purpose of some extra bedrooms being built under the existing house.  A combination of excavator, bobcat, rock saw and tippers were used to complete a reasonably difficult job.  All excavated material was removed from site.

This rock excavation in Lane Cove, for a stormwater retention tank was in solid sandstone, and required the use of a rocksaw and rockbreaker (to reach the required depth of 4 metres).

This pool excavation was carried out in the North West of Sydney at Castle Hill.

This pool excavation at Castle Hill needed the use of a hydraulic hammer (rock breaker). All the fill was loaded with a bobcat onto bogie trucks and removed from site. The customer and client were extremely happy with the finished product.

Read the rest of this entry »

This was a great job in Summer Hill. Most of these sites are pretty tight in Sydneys Inner West, the owners had decided to put a new triple garage in and a swimming pool. We had to excavate the strip footings and piers and then in the backyard excavate for a 8 x 4 m swimming pool. We then removed all the material from the site and used the Bobcat to clean the site up afterwards.

This was an interesting site excavation job out at Kellyville Ridge on one of the new land releases for two new blocks of units. We had to excavate stormwater drainage and sewer for the site and then excavate for all the finished levels prior to landscaping. As usual we cleaned up the finished site with our bobcat and tipper.

This was a really tight site to get into. We ended up lowering our Bobcat into the site using a large crane to complete deep excavation and site cleanup work. If you have a tight site and are looking for a solution talk to us about lowering our Bobcat or Excavator

Very deep site excavation for a house in Gladesville Site to extend an existing dwelling. This included 4 m deep piers & strip footings and then we used our Bobcat and tipper to remove all material from site